Disposable Vinyl Examination gloves

来自:Shandong Zhushi Pharmaceutical Group Co., Ltd 发布时间:2020-12-05
摘要:

Disposable Vinyl Examination gloves

[product name] medical examination gloves (Disposable Vinyl Examination gloves)

[model and specification] it can be divided into Nitrile, rubber, latex, PVC, PE and TPE according to different materials used;

It can be divided into XS, s, m, l and XL according to the size;

According to the different surface forms, it can be divided into smooth surface and pitted surface, with and without powder.

[product description] it is usually made of polyethylene, rubber and other materials. It has enough strength and barrier performance. Non sterile, disposable.

[intended use] it is used to check or touch the patient's condition on the doctor's hand.

[usage] before wearing gloves, remove all hand ornaments and trim the nails smoothly. According to the general surgical disinfection standard, the hand should be cleaned, disinfected and dried, and gloves suitable for personal hand type should be worn.

[precautions] 1. When wearing gloves, do not wear rings or other accessories, and trim the nails smoothly.

2. No matter left or right hand, please choose gloves suitable for your hand type.

3. Please do not use if the gloves are contaminated due to package damage.

4. This product is for single use only. Please destroy it after use.

5. It is strictly forbidden to contact metal and chemical drugs harmful to rubber, such as oil, acid, alkali, copper and manganese;

6. It should be used with caution if there is a history of allergy to polyethylene products.

7. Too high temperature can cause great damage to plastic gloves.

[record No.] lhxb No. 20200171

[product technical requirements No.] lhxb No. 20200171

[production record certificate No.] lhejjxb No. 20160003

[manufacturer] Shandong Zhushi Pharmaceutical Group Co., Ltd

[registered address] Fanlou Road South, Shanxian Development Zone

[production address] No.6, Shande Road, Shanxian economic and Technological Development Zone, Shandong Province

[contact information] 13256133668

[after sales service agency] Shandong Zhushi Pharmaceutical Group Co., Ltd

[date of manufacture] see sheet packing

[service life] 2 years

[storage conditions] keep in dark, sealed and dry place

[preparation date] May 26, 2020

Disposable Vinyl Examination gloves

1. Product model / specification and its classification

Product description

It is usually made of polyethylene, rubber and other materials. It has enough strength and barrier performance. Non sterile, disposable.

1.1 model and specification

According to the different materials used, it can be divided into: Nitrile, rubber, latex, PVC, PE, TPE;

It can be divided into XS, s, m, l and XL according to the size;

According to the different surface forms, it can be divided into smooth surface and pitted surface, with and without powder.

Performance index 2

2.1 appearance

2.1.1 the surface of gloves shall be pressed firmly, and the periphery shall be neat without air leakage.

2.1.2 the color is uniform without obvious impurities, black spots and stains.

2.2 model and specification

According to the different materials used, it can be divided into: Nitrile, rubber, latex, PVC, PE, TPE;

It can be divided into XS, s, m, l and XL according to the size;

According to the different surface forms, it can be divided into smooth surface and pitted surface, with and without powder.

2.3 physical properties

Serial number

project

index

2.3.1

Tensile strength (longitudinal and transverse), MPa

≥10

Nominal strain at fracture (longitudinal and transverse),%

≥100

2.3.2

Impermeability

No crack, no leakage

2.3.3

Fatigue resistance

There is no obvious deformation, crack and leakage

3. Test method

3.1 appearance

Visual inspection under normal illumination. It shall meet the requirements of 2.1.1 and 2.1.2.

3.2 general measurement shall meet the requirements of 2.2.

3.2.1 tensile strength and nominal strain at break

The sample shall be cut from the palm or back of the glove and determined according to GB / T 1040.3. Type 2 sample shall be used with the width of 10 mm and gauge distance of 50 mm. Test speed (no load) (500 ± 50) mm / min. It shall meet the requirements of 2.3.1.

3.2.2 impermeability

With the cuff upward, inject fresh water at (23 ± 2) ℃ into the glove to (40 ± 5) mm away from the cuff, keep it vertical, and after standing for 3min, observe and wipe the sample surface and heat sealing position with filter paper, and there shall be no crack or leakage. Three samples Were tested. It shall meet the requirements of 2.3.2

3.2.3 fatigue resistance

Put on the gloves, after 30 times of fist clenching (see Note 1) and relaxation (see Note 2), the gloves shall be free from obvious deformation and rupture, and all parts shall be free from leakage. Three samples shall meet the requirements of 3.2.3.

Note 1: when clenching a fist, the fingers should be bent to the palm of the palm to form a fist. No additional force is needed to avoid the damage of fingernails to gloves.

Note 2: when relaxing, open the palm until the five fingers are straight.

Disposable Vinyl Examination gloves

Disposable Vinyl Examination gloves

Disposable Vinyl Examination gloves

Disposable Vinyl Examination gloves

Disposable Vinyl Examination gloves

Disposable Vinyl Examination gloves

Disposable Vinyl Examination gloves




首页 联系电话 邮箱